Epoxy Resins & Epoxy Adhesives

Epoxy resins and adhesives are characterised by their excellent electrical properties and chemical resistance, strength and low absorption of moisture. They make great adhesives and also one of the few types of glue that can be used on metals and glass. Epoxy can be used as a protective coating as well as materials in circuit boards and for patching holes in concrete pavements. These versatile resins offer high strength resistance to corrosion. The high strength to weight ratio and dimensional stability as well as adhesion properties make them ideal for a wide range of applications. Different resins are produced by varying the ratios of the chemical components.



Resins are relatively high in viscosity (measure of its resistance to flow), so that they are moulded at temperatures around 50 to 100°C, or dissolved in an inert solvent (solvent that does not react with anything in solution) to reduce viscosity to a point at which lamination at room temperature becomes possible.



How are they made?


Most epoxy resins are an industrial product derived from petroleum and are themselves the result of a chemical reaction called curing. This involves epoxies and other chemicals more commonly known as hardeners or curing agents. Depending on the type of reaction used to produce them, they can be either low-molecular honey-like liquids or high-molecular, solid substances. Their molecular weight often determines their potential uses and applications.



Did you know?


Currently. there are more than 50 different substances known as epoxy resins. Also, there are hundreds of hardeners to modify epoxy polymer properties to meet the most varied requirements.



Epoxy uses


  • General purpose adhesives

  • As the binder in cement and mortars

  • Rigid foams

  • Non-skid coatings

  • Solidifying sandy surfaces in oil drilling

  • Industrial coatings

  • Potting and encapsulating media

  • Fibre reinforced plastics


Advantages of Epoxy


  • Low shrink during cure

  • Excellent moisture and chemical resistance

  • Good electrical properties

  • Increased mechanical and fatigue strength

  • Impact resistant

  • No VOCs (Volatile Organic Compounds)

  • Long shelf life

  • ...
Read more Read less

Filters

Viewing 1 - 20 of 54 products
Results per page
Description Price Material Compatibility Colour Package Type Package Size Setting Time Minimum Operating Temperature Maximum Operating Temperature Trade Name Cure Time Flame Retardant Shear Strength Filler Material Chemical Composition Odour
RS Stock No. 850-934
BrandRS PRO
$25.74
Each
units
Aluminium, Steel Yellow Cartridge 40 ml 3 → 4min - - - 2 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 850-962
BrandRS PRO
$16.43
Each
units
Metal Black Syringe 25 ml 5min - - - 24 h Yes - Inorganic Barium Sulphate, Bisphenol A-(Epichlorhydrin), Limestone, Magnesium Carbonate, Talc -
RS Stock No. 850-940
BrandRS PRO
$13.51
1 Kit
Kit(s)
Glass, Metal, Plastic, Wood Clear Tube 16 g - - - - 24 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 567-581
BrandRS PRO
$30.52
Each
units
- Red Syringe 10 ml - - +140°C - 20 (120°C) min, 40 (100°C) min, 60 (90°C) min - - - Aliphatic Amines, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether -
RS Stock No. 132-605
BrandRS PRO
$14.43
Each
units
Ceramic, Glass, Metal, Plastic, Stone, Wood Transparent Dual Cartridge 24 ml - - - - - No - - Epoxy Resin Mercaptan
RS Stock No. 850-956
BrandRS PRO
$61.06
1 Kit
Kit(s)
Glass, Metal, Plastic, Wood Yellow Tube 150 g - - - - 24 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS Stock No. 691-189
BrandRS PRO
$145.81
Each
units
Stainless Steel Grey Tub 500 g 58min - +121°C - 16 h - 16 MPa Steel - -
RS Stock No. 553-614
BrandRS PRO
$102.01
1 Box of 50
Box(es)
Ceramic, Concrete, Metal, Plastic, Wood Transparent Sachet 150 g 3 → 5min -55°C +100°C - 24 h Yes - - 2, 4, 6-Tris(Dimethylaminomethyl)Phenol Characteristic
RS Stock No. 691-195
BrandRS PRO
$138.08
Each
units
Metal - Tub 500 g 60min - +121°C - 16 h - 18 MPa Aluminium - -
RS Stock No. 691-230
BrandRS PRO
$82.62
Each
units
Concrete, Metal, Plastic Grey Tub 500 g 45min - +121°C - 16 h - - Metal - -
RS Stock No. 159-3957
BrandRS PRO
$10.39
Each
units
Glass Fibre Reinforced Polymer, Metal, Plastic, Wood Yellow Dual Cartridge 30 g - - - - - Yes - - 2-Piperazin-1-Ylethylamine, Nonylphenol Slight
RS Stock No. 691-151
BrandRS PRO
$73.54
Each
units
Aluminium, Brass, Bronze, Concrete, Ferrous Metal, Metal, Plastic, Steel Grey Tub 500 g 60min - +121°C - 16 h - 18 MPa Ceramic - -
RS Stock No. 691-173
BrandRS PRO
$61.15
Each
units
Metal, Steel Grey Tub 500 g - - +93°C - 16 h - 14 N/mm² Steel - -
RS Stock No. 561-182
BrandRS PRO
$17.00
1 Bag of 4
Bag(s)
Ceramic, Concrete, Glass Fibre Reinforced Polymer, Masonry, Plaster, Plastic, Wood Blue, White Strip 4 Strips 5min -20°C +120°C - 24 h - - - - Ammoniacal, Sulphurous
New
RS Stock No. 406-9592
BrandRS PRO
$26.00
Each
units
Aluminium, Steel Yellow Cartridge 200 ml 3 → 4min - - - 2 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Characteristic
RS Stock No. 850-978
BrandRS PRO
$80.95
1 Kit
Kit(s)
Metal White Tub 500 g - - - - 24 h Yes - Aluminium 2, 3, 2'-Iminodiethylamine, 4-Tert-Butylphenol, 6-Diazaoctanethylenediamine, Aluminium Powder (Pyrophoric), Barium Sulphate, Silica Quartz Sweet
RS Stock No. 691-145
BrandRS PRO
$94.59
Each
units
Metal Blue Tub 500 g 40min - +177°C - 24 h Yes 13.75 MPa Ceramic Bisphenol A Diglycidyl Ether Resin, Titanium Dioxide Slight
RS Stock No. 918-1401
BrandRS PRO
$16.13
Each
units
Metal, Plastic Yellow Cartridge 25 ml - - - - 20 min @ +100°C, 60 min @ +75°C - - - Epoxy Resin Slight
RS Stock No. 739-6923
Mfr. Part No.1985608
BrandAraldite
$7.49
Each
units
Ceramic, Concrete, Glass, Leather, Marble, Metal, Plastic, Stone, Wood Transparent Syringe 3 g 90s - - Araldite Fusion - - - - - -
RS Stock No. 784-4863
Mfr. Part No.ER2220RP250G
$50.76
Each
units
- Black, Grey Pack 250 g - -40°C +130°C ER2220 1 h, 24 h, 4 h Yes - - - -
Related Products
A white, two part epoxy able to bond ...
Description:
A white, two part epoxy able to bond many low surface energy plastics, including polypropylene and polyethylene without special surface preparation. Supplied in duo pack format. Mixes through nozzle ensuring precise base & accelerator ratios. Requires 3M EPX™ manual dispenser ...
The silver loaded epoxy is a 2 part ...
Description:
The silver loaded epoxy is a 2 part thermosetting material with an epoxy resin adhesive base which contains silver flakes. All models are highly reliable and excellent quality. After curing, hard and wear resistantHigh electrical conductivityResin to hardener mix ratio: ...
The required amount of putty is torn from ...
Description:
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materialsCan be ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Repairs pumps, valves, flanges and sealsPrevents abrasion ...