Phoenix Contact MACX MCR Series Signal Conditioner, Voltage Input, Current, Voltage Output, 24V dc Supply
- RS Stock No.:
- 171-7044
- Mfr. Part No.:
- 2906244
- Brand:
- Phoenix Contact
- RS Stock No.:
- 171-7044
- Mfr. Part No.:
- 2906244
- Brand:
- Phoenix Contact
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Phoenix Contact Voltage Measuring Transducer, 24V DC, 22mA - MACX MCR-VAC-PT - 2906244
This transducer from Phoenix Contact is a sensor that sends data to a monitoring device such as a PLC (programmable logic controller). It sends the data in the form of volts, providing a reading in DC (direct current) voltage of the same relative amount as the AC (alternate current) voltage.
The unit has an adjustable voltage range, so you can set it to suit your specifications. It has three-way isolation, which can control output signals at two separate points for bi-directional use. Push-in connection technology makes it simple to install.
The voltage transmission of this transducer means it's ideal for use with small devices and components that are less susceptible to electromagnetic interference (EMI). It converts currents in under 180ms (milliseconds) for a rapid response.
The unit has an adjustable voltage range, so you can set it to suit your specifications. It has three-way isolation, which can control output signals at two separate points for bi-directional use. Push-in connection technology makes it simple to install.
The voltage transmission of this transducer means it's ideal for use with small devices and components that are less susceptible to electromagnetic interference (EMI). It converts currents in under 180ms (milliseconds) for a rapid response.
Features & Benefits
• Low-level power consumption of under 45mA for greater energy efficiency
• Suitable for DIN rail mounting for ease of installation
• Compact dimensions of 99 (height) x 22.5 (width) x 114.5mm (depth) for installation in areas where space is limited
• Wide operating temperature range of -25°C to +60°C for use in a variety of environments
• Suitable for DIN rail mounting for ease of installation
• Compact dimensions of 99 (height) x 22.5 (width) x 114.5mm (depth) for installation in areas where space is limited
• Wide operating temperature range of -25°C to +60°C for use in a variety of environments
Adjustable voltage ranges
Bidirectional output signals
3-way isolation
ZERO/SPAN adjustment ±20%
Tool-free parameterization of measured values
Teach-in configuration of the measured value range
Bidirectional output signals
3-way isolation
ZERO/SPAN adjustment ±20%
Tool-free parameterization of measured values
Teach-in configuration of the measured value range
Specifications
Attribute | Value |
---|---|
Module Type | Voltage Transducer |
Input Signal Type | Voltage |
Output Signal Type | Current, Voltage |
Input Range | 0 → 550V ac |
Output Range | -10 → 10 V, -20 mA → 20mA |
Supply Voltage | 24V dc |
Mounting Type | DIN Rail Mount |
Operating Temperature Range | -25 → +60°C |
Series | MACX MCR |
Maximum Operating Temperature | +60°C |
Minimum Operating Temperature | -25°C |
Standards Met | CE, cUL, CULus, EAC, EN 61000-6-2, EN 61000-6-4, IEC 61010-1, IEC 61010-2-030, UL |
Related links
- Phoenix Contact 3RS7005 Series Signal Conditioner Current 24V dc Supply
- GIC Signal Conditioner Voltage Input Voltage Output, 24V dc Supply
- Phoenix Contact MACX MCR Series Signal Conditioner Current 24V dc...
- Wago 857 Series Signal Conditioner Current 24V dc Supply, IECEx
- Wago Jumpflex Series Signal Conditioner Current 24V dc Supply
- Wago Signal Conditioner Voltage Input Voltage Output, 24V dc Supply
- Phoenix Contact MINI MCR Series Signal Conditioner Current 24V dc Supply
- Wago Signal Conditioner Current 24V dc Supply IECEx