- RS Stock No.:
- 291-9704
- Brand:
- RS PRO
- RS Stock No.:
- 291-9704
- Brand:
- RS PRO
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
RS PRO SPDT Reed Relay, 0.25 A, 5 V DC
If you're looking for a compact, speedy relay to use in an electrical circuit, consider this RS PRO single-pole, normally open (SPNO) reed relay. The neat and low profile design features a mineral-filled casing, and the device has copper alloy pins for strength coupled with high conductivity. It has a maximum switching current of 0.25 A AC/DC and a coil voltage of 5 V DC.
You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.
Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.
You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.
Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.
Features and Benefits
• Reed relay with SPNO contact configuration
• Maximum switching power of 3 W (DC)
• Maximum switching current rating of 0.25 A (AC/DC)
• Isolation coil to contact of 1.5 kV DC
• Maximum switching voltage of 175 V DC
• Life of 1000000000 electric cycles
• Operating time of 0.5 ms
• PCB mounting type
• Contact resistance of 150 (Static) mΩ and 200 (Dynamic) mΩ
• Operating temperature range of -20°C to +70°C
• Coil power of 50 mW
• Dimensions of 19.3 mm x 6.4 mm x 5.1 mm
• Coil voltage of 5 V DC
• Through-hole terminal
• Coil resistance of 200 Ω
• RoHS (Restriction of Hazardous Substances) compliant
• Maximum switching power of 3 W (DC)
• Maximum switching current rating of 0.25 A (AC/DC)
• Isolation coil to contact of 1.5 kV DC
• Maximum switching voltage of 175 V DC
• Life of 1000000000 electric cycles
• Operating time of 0.5 ms
• PCB mounting type
• Contact resistance of 150 (Static) mΩ and 200 (Dynamic) mΩ
• Operating temperature range of -20°C to +70°C
• Coil power of 50 mW
• Dimensions of 19.3 mm x 6.4 mm x 5.1 mm
• Coil voltage of 5 V DC
• Through-hole terminal
• Coil resistance of 200 Ω
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Approvals
UL
Specifications
Attribute | Value |
---|---|
Contact Configuration | SPDT |
Coil Voltage | 5V dc |
Mounting Type | PCB Mount |
Maximum Switching Current AC | 0.25 A |
Maximum Switching Current DC | 0.25 A |
Maximum Switching Voltage AC | 175V ac |
Maximum Switching Voltage DC | 175V dc |
Coil Power | 125mW |
Coil Resistance | 200 Ω |
Length | 19.3mm |
Height | 5.1mm |
Depth | 6.4mm |
Dimensions | 19.3 x 6.4 x 5.1mm |
Isolation Coil To Contact | 1.5kV dc |
Minimum Operating Temperature | -20°C |
Contact Resistance | 150 (Static) mΩ, 250 (Dynamic) mΩ |
Terminal Type | Through Hole |
Maximum Operating Temperature | +70°C |
Life | 100000000 (Electrical) cycles |
Maximum Switching Power DC | 3 W |
Operating Temperature Range | -20 → +70°C |
Standards Met | RoHS Compliant |
Operating Time Including Bounce | 0.7ms |
Related links
- Reed Switches
- Reed Relays
- Reed Switch Magnets
- Sensata / Cynergy3 Reed Switch Magnet for use with Reed Switch
- RS PRO PCB Mount Reed Relay SPST 0.5 A Max, 200Ω
- Assemtech Reed Switch Magnet for use with Reed Switch
- Meder PCB Mount Reed Relay DPDT 0.25 A Max, 150Ω
- Sensata / Cynergy3 PCB Mount Reed Relay SPST 0.25 A Max, 250Ω