- RS Stock No.:
- 738-9366
- Mfr. Part No.:
- ZD1000
- Brand:
- Teledyne LeCroy
- RS Stock No.:
- 738-9366
- Mfr. Part No.:
- ZD1000
- Brand:
- Teledyne LeCroy
Legislation and Compliance
RoHS Status: Exempt
- COO (Country of Origin):
- US
Product Details
Teledyne LeCroy ZD Series Active Differential Probes
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes) differential probes measure the difference in voltage of a test point in relation to another test point. High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make LeCroy ZD Series differential probes ideal for applications such as automotive development and failure analysis, together with wireless and data communication design. With its ProBus interface, the ZD Series probe becomes an integral part of the oscilloscope. Probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required. Teledyne LeCroy also offers PK111 ( 7898337 ) which is a replacement accessory kit for ZD500, ZD1000 & ZD1500.
Applications:
CMRR (typical) 80dB @ 60 Hz (ZD200), 60dB @ 50/60 Hz (ZD500, ZD1000, ZD1500)
Supplied with
Adapted probe leads and tips, instruction manual, certificate of calibration
Supplied With:
- Y lead adapter
- 2x solder-in lead
- 2x long spring loaded bendable ground
- 2x tip saver
- swivel tip adapter
- 2x small IC adapter
- 6x micro pogo pin tip
- 2x right angle connector short
- 2x right angle connector long
- 2x micrograbber
- 2x minigrabber
- 2x short spring loaded bendable ground
- probe calibration fixture
- ZD replacement kit instruction manual
- Certificate of calibration
Supplied with
Y lead adapter, 2x solder-in lead, 2x long spring loaded bendable ground, 2x tip saver, swivel tip adapter, 2x small IC adapter, 6x micro pogo pin tip, 2x right angle connector short, 2x right angle connector long, 2x micrograbber, 2x minigrabber, 2x short spring loaded bendable ground, probe calibration fixture, ZD replacement kit instruction manual, certificate of calibration
Specifications
Attribute | Value |
---|---|
Probe Type | Active, Differential |
Attenuation | 1:1 |
Bandwidth | 1.2GHz |
Maximum Common Mode Input Voltage | 10V |
Model Number p | ZD1000 |
Series | ZD |
Rise Time | 375ps |
Related links
- Keysight Technologies Oscilloscope Software for Use with DSOX1102A...
- Rohde & Schwarz Triggering & Decoding Oscilloscope Software for...
- Keysight Technologies Oscilloscope Software for Use with EDUX1102A...
- Teledyne LeCroy Oscilloscope Software for Use with WaveSurfer 3000...
- Rohde & Schwarz Oscilloscope Software for Use with RTB2000 Digital...
- Rohde & Schwarz Oscilloscope Software for Use with RTB2002 Digital...
- Rohde & Schwarz Oscilloscope Software for Use with RTB2004 Digital...
- Pico Technology PP877 Oscilloscope Adapter, For Use With Oscilloscope