- RS Stock No.:
- 185-0203
- Mfr. Part No.:
- BD60203EFV-E2
- Brand:
- ROHM
Discontinued product
- RS Stock No.:
- 185-0203
- Mfr. Part No.:
- BD60203EFV-E2
- Brand:
- ROHM
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
BD60203EFV is 2ch H-bridge motor driver for DC brush motor. This driver can facilitate low power consumption by PWM constant current control. Various protection circuits are built in. And also a circuit for lock detection is built in, so it is possible to output an error detection signal corresponding to Wired-Or signalling motor lock status. It contributes to high reliability of the set.
Single Power Supply Input (rated voltage of 36 V)
Rated Output Current (peak): 1.7 A(3.0 A)
Low ON-Resistance DMOS Output
PH, EN Input
Power Save Function
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise filter is unnecessary)
Driver for 2 DC Brush Motor
Built-in Logic Input Pull-down Resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lockout Circuit (UVLO)
Over Voltage Lockout Circuit (OVLO)
Built-in Comparator for Lock Detection
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Microminiature, Ultra-thin and High Heat-radiation (exposed metal type) HTSSOP-B24 Package
Rated Output Current (peak): 1.7 A(3.0 A)
Low ON-Resistance DMOS Output
PH, EN Input
Power Save Function
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise filter is unnecessary)
Driver for 2 DC Brush Motor
Built-in Logic Input Pull-down Resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lockout Circuit (UVLO)
Over Voltage Lockout Circuit (OVLO)
Built-in Comparator for Lock Detection
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Microminiature, Ultra-thin and High Heat-radiation (exposed metal type) HTSSOP-B24 Package
Specifications
Attribute | Value |
---|---|
Motor Type | Brushed DC |
Output Configuration | DMOS |
Configuration | H Bridge |
Maximum Output Current | 1.7 (Continuous) A, 3 (Peak) A |
Maximum Supply Voltage | 36 V |
Mounting Type | Surface Mount |
Package Type | HTSSOP |
Pin Count | 24 |
Maximum Operating Supply Voltage | 28 V |
Minimum Operating Supply Voltage | 8 V |
Maximum Operating Temperature | +85 °C |
Product Width | 5.6mm |
Product Length | 7.8mm |
Dimensions | 7.8 x 5.6 x 0.85mm |
Length | 7.8mm |
Minimum Operating Temperature | -25 °C |
Product Height | 0.85mm |
Width | 5.6mm |
Height | 0.85mm |