Telemecanique Sensors Inductive Barrel-Style Proximity Sensor, M30 x 1.5, 22 mm Detection, PNP Output, 12 → 48 V

RS Stock No.:: 181-685
Mfr. Part No.:: XS230AAPAL2
Brand:: Telemecanique Sensors

Telemecanique Sensors Inductive Barrel-Style Proximity Sensor, M30 x 1.5, 22 mm Detection, PNP Output, 12 → 48 V

This image is representative of the product range

Stocked by manufacturer – available for delivery 02/07/2024

Added

Price (ex. GST) Each

$182.90

(exc. GST)

$201.19

(inc. GST)

Units	Per unit
1 - 2	$182.90
3 +	$175.59

RS Stock No.:: 181-685
Mfr. Part No.:: XS230AAPAL2
Brand:: Telemecanique Sensors

Technical data sheets

Legislation and Compliance

RoHS Status: Not Applicable

Product Details

Food Industry Sensors

Telemecanique OsiSense inductive sensors specifically designed for the food, beverage and pharmaceutical industries.

Styles Available.

From freezing: -25°C to sterilisation at +85°C
Cylindrical stainless steel and plastic bodies
Connector sensor conforming to IEC 60529, IP67
Cabled sensor conforming to IP68 (double insulation)
DIN 40050 IP69K (cabled and connector types)
Pre-cabled or connector for quick disconnect
Tamper-proof laser identification
Non-flush mount
Stock nos. 181-629, 181-691, 181-720 and 181-641 are 2 wire type and require a M12 connector, see stock no. 695-6877

How do they work and where can I use them?

Inductive proximity sensors contain a coil and an oscillator, these create an electromagnetic field close to the sensing surface. When metal enters this field, a change occurs in the oscillating amplitude. This, in turn, changes the sensor output, showing you and equipment that metal has been sensed. Inductive proximity sensors are suitable for use most industries. Inductive sensors are unaffected by oil, dirt or surface finish and can be used in high vibration and high shock areas.

Applications.

Food and beverage.

Phatmaceutical.

General Features.

From freezing: -25°C to sterilisation at +85°C

Cylindrical stainless steel and plastic bodies

Connector sensor conforming to IEC 60529, IP67

Cabled sensor conforming to IP68 (double insulation)

DIN 40050 IP69K (cabled and connector types)

Pre-cabled or connector for quick disconnect

Tamper-proof laser identification

Non-flush mount

Stock nos. 181-629, 181-691, 181-720 and 181-641 are 2 wire type and require a M12 connector, see stock no. 695-6877

Specifications

Attribute	Value
Sensor Technology	Inductive
Body Style	Barrel
Thread Size	M30 x 1.5
Output Type	PNP-NO
Detection Range	22 mm
Terminal Type	Cable
Supply Voltage	12 → 48 V dc
IP Rating	IP69K
Length	60mm
Maximum DC Voltage	58V
Mounting Type	Non Flush
Switching Current	200 mA
Housing Material	PPS
Maximum Operating Temperature	+85°C
Maximum Switching Frequency	500Hz
Short Circuit Overload Protection	Yes
Minimum Operating Temperature	-25°C