Sensata/Cynergy 3 FSVPLC Series In-line Flow Switch for Liquid, 0.6 L/min Min, 80 L/min Max

The FSVPLC can be used to control some other equipment or process via a PLC. If used in a pumped system, the device has to be fitted in the pipe above the pump. The FSVPLC gives a closed contact signal to the PLC once the flow rate exceeds 0.6 L/min or 3.0 L/min, depending on version.

• Signal level output to PLC

This in-line flow switch from Sensata Cynergy3 reliably monitors the motion and pressure of liquids and automatically conditions flow rates. When linked to a PLC (programmable logic controller), the switch can control other equipment to open or close the supply of liquid to a tank to ensure adequate fluid levels. It works using a plunger that's activated when liquid flow increases beyond a particular level. The plunger's internal magnet opens a switch to keep liquids at an appropriate level. The switch has a 1-inch BSP (British Standard Pipe) connection for a simple and secure attachment. It's suitable for use in industrial applications such as heating and air conditioning systems.

• Made from a durable brass material with good resistance to corrosion for an extended service life
• Automatic shutdown when flow stops for improved efficiency
• Maximum pressure of 8 bar for use in high-pressure systems

This switch is designed to work with flow rates ranging from 0.6L/min to 80L/min, making it a versatile choice.