MEAN WELL SDR Switched Mode DIN Rail Power Supply, 180 → 264V ac ac Input, 48V dc dc Output, 20A Output, 960W

RS Stock No.:: 122-2227
Mfr. Part No.:: SDR-960-48
Brand:: MEAN WELL

MEAN WELL SDR Switched Mode DIN Rail Power Supply, 180 → 264V ac ac Input, 48V dc dc Output, 20A Output, 960W

4 In Global stock for delivery within 10 working day(s)

Added

Price (ex. GST) Each

$1,313.27

(exc. GST)

$1,444.60

(inc. GST)

Units	Per unit
1 - 4	$1,313.27
5 +	$1,080.81

RS Stock No.:: 122-2227
Mfr. Part No.:: SDR-960-48
Brand:: MEAN WELL

Technical data sheets

Legislation and Compliance

Product Details

Mean Well SDR Series Single Output Industrial Power Supply

Economical and slim, the SDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.
The SDR series is an ideal choice for many industries, fitting various inductive or capacitive applications.

Features and Benefits

• Short circuit/Overload/Over voltage/Over temperature protections

• Can be installed on DIN Rail TS-35/7.5 or 15

• Cooling by free air convection

• UL 508 (industrial control equipment) approved

• EN61000-6-2 (EN50082-2) industrial immunity level

• 100% full load burn-in test

• 3 years warranty

• High efficiency 90% (SDR-75) 94% (SDR-960) and low-power dissipation

• 150% (SDR-75) 130% (SDR-960) peak load capability

Product Application Information

The SDR series PSU by Mean Well is ideal for use in industrial control systems, semiconductor fabrication equipment, factory automation and electro-mechanical apparatus.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.

Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.

Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.

Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.

Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.

Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.

Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Mean Well SDR-960-48 Power Supply, 48 V, 20 A, 960 W

AC input 180 V ac to 264 V ac only

110 mm slim design

Built-in active PFC function compliance to EN61000-3-2

Built-in constant current limiting circuit

Current sharing up to 3840 W (3+1)

Built-in DC OK relay contact

Specifications

Attribute	Value
Type	Switched Mode
Output Voltage	48V dc
Output Current	20A
AC or DC Input Voltage	ac
AC or DC Output Voltage	dc
Input Voltage	180 → 264V ac
Power Rating	960W
Electrical Phase	1
Number of Outputs	1
Height	125mm
Width	110mm
Depth	150mm
Series	SDR
Load Regulation	±1%
Output Voltage Adjustment Range	48 → 55V
MTBF	69.8kh
Ripple And Noise	250mV Pk-Pk
Minimum Temperature	-30°C
Special Features	Overvoltage and Short Circuit Protection
Standards Met	RoHS Compliant, TUV EN 60950-1, UL 508
Maximum Temperature	+70°C
Mounting Type	DIN Rail Mount