DSPIC33EP32MC202-I/SS Microchip, 16bit Digital Signal Processor 140MHz 32 kB Flash 28-Pin SSOP

RS Stock No.:: 825-1032
Mfr. Part No.:: DSPIC33EP32MC202-I/SS
Brand:: Microchip

DSPIC33EP32MC202-I/SS Microchip, 16bit Digital Signal Processor 140MHz 32 kB Flash 28-Pin SSOP

1025 In Global stock for delivery within 10 working day(s)

Added

Price (ex. GST) Each (In a Pack of 5)

$3.288

(exc. GST)

$3.617

(inc. GST)

Units	Per unit	Per Pack*
5 - 45	$3.288	$16.44
50 - 120	$3.232	$16.16
125 +	$3.126	$15.63
*price indicative

RS Stock No.:: 825-1032
Mfr. Part No.:: DSPIC33EP32MC202-I/SS
Brand:: Microchip

Technical data sheets

Datasheet

Legislation and Compliance

Product Details

dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers

The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.

Microcontroller Features

70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)

Peripherals

High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Specifications

Attribute	Value
Maximum Frequency	140MHz
Data Bus Width	16bit
RAM Size	4 kB
Instruction Set Architecture	DSP
Program Memory Size	32 kB
Program Memory Type	Flash
Mounting Type	Surface Mount
Package Type	SSOP
Pin Count	28
Typical Operating Supply Voltage	3 to 3.6 V
Number of UART Channels	2
Number of PCI Channels	0
Minimum Operating Temperature	-40 °C
PWM Resolution	16bit
Number of CAN Channels	0
ADC Channels	6
Number of ADC Units	1
Maximum Operating Temperature	+85 °C
Number of PWM Units	4
Length	10.5mm
ADCs	1(6 x 10 bit)/1(6 x 12 bit)
Timer Resolution	16 bit, 32bit
Height	1.85mm
Number of LIN Channels	0
PWM Channels	6
Width	5.6mm
Number of I2C Channels	2
Number of Timers	12
Number of Ethernet Channels	0
USB Channels	0
Number of SPI Channels	2
Pulse Width Modulation	4 x 16 bit, 6 (Motor Control)
Dimensions	10.5 x 5.6 x 1.85mm
Number of USART Channels	0
Timers	2 x 32 bit, 5 x 16 bit
ADC Resolution	12 bit, 10bit