- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
- RS Stock No.:
- 131-1335
- Mfr. Part No.:
- 8.07.00 JTAG Isolator
- Brand:
- SEGGER
Technical data sheets
Legislation and Compliance
Product Details
J-Link ARM JTAG Isolator Board
The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
1kV DC optical isolation
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
Specifications
Attribute | Value |
---|---|
For Use With | J-Link Probes |
Kit Name | J-Link ARM JTAG Isolator Board |
Product Type | Programmer |
Related links
- Insertion & Extraction Tools
- IDC Tools
- Crimp Tool Positioners, Turrets & Locators
- Clamps
- CK Polyester, 4 Pocket Tool Belt Pouch
- Digilent 410-299 for use with JTAG-HS3, Xilinx Tool
- Single Parameter(s) Chlorine Test Strips, max. measurement 200ppm...
- Connective Peripherals I2C SPI USB C Female Interface Converter