- RS Stock No.:
- 169-7584
- Mfr. Part No.:
- ABX00012
- Brand:
- Arduino
Stock check temporarily unavailable - call for stock availability
Added
Price (ex. GST) Each
$45.14
(exc. GST)
$49.65
(inc. GST)
Units | Per unit |
1 - 9 | $45.14 |
10 - 24 | $44.20 |
25 - 99 | $43.34 |
100 + | $41.18 |
- RS Stock No.:
- 169-7584
- Mfr. Part No.:
- ABX00012
- Brand:
- Arduino
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- IT
Product Details
Arduino MKR ZERO
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
Onboard SD connector with SPI interface
Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
Onboard LED - connected to a dedicated pin (32)
Vin pin - used to power the board with regulated 5V source
5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
VCC pin - outputs 3.3V through on-board regulator
LED ON - connected to the 5V input from either USB or VIN
Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
5V board power supply
Li-Po single cell, 3.7V, 700mAh minimum battery
DC Current for 3.3V/5V - 600 mA
Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
22 digital pins
Flash memory of 256 KB and 8 KB for bootloader
32 KB SRAM
Full speed USB device and embedded Host
Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.
What can you find on Arduino MKR ZERO board?
Onboard SD connector with SPI interface
Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
Onboard LED - connected to a dedicated pin (32)
Vin pin - used to power the board with regulated 5V source
5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
VCC pin - outputs 3.3V through on-board regulator
LED ON - connected to the 5V input from either USB or VIN
Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging
Features and Benefits
5V board power supply
Li-Po single cell, 3.7V, 700mAh minimum battery
DC Current for 3.3V/5V - 600 mA
Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
22 digital pins
Flash memory of 256 KB and 8 KB for bootloader
32 KB SRAM
Full speed USB device and embedded Host
Specifications
Attribute | Value |
---|---|
Product Name | MKR ZERO (I2S Bus & SD for Sound, Music & Digital Audio Data) |
Kit Classification | Development Board |
Processor Part Number | ATSAMD21G18A |